top of page

Load data for .219 Zipper + .224 | 35gr | IBEX TRD

Recommended Powder(s): Vihtavuori N120

.219 Zipper + .224 | 35gr | IBEX TRD

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 35gr | IBEX TRD
Manufacturer SKU:
T9013
Bullet Weight:
35gr | 2.3g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.571" | 14.5mm
Caliber:
.219 Zipper load data
Case Length (l3):
1.933" | 49.1mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.278" | 7.1mm
Shank Seated Depth:
0.243" | 6.2mm
Case Capacity:
34.0 Grains of Water | 2.21 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
41336 psi | 2850 bar
LID:
LID_B7000_C58
Last updated:
2025-02-02
Recommended Twist Rate:
1:14 - 1:11

Load data for 22 loads in caliber .219 Zipper with .224 | 35gr | IBEX TRD bullet and 11 powders such as Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
85%
36898
89%
**07
98%
[Accurate 2015]*
<<locked>>
93%
36100
87%
**35
93%
Alliant AR-Comp
<<locked>>
96%
35143
85%
**71
95%
[Alliant Reloder-10x]*
<<locked>>
90%
35839
87%
**68
94%
Alliant Reloder-7
<<locked>>
83%
36448
88%
**09
95%
Hodgdon TrailBoss
<<locked>>
97%
28979
70%
**51
100%
IMR 4198
<<locked>>
88%
36390
88%
**28
95%
Norma 200
<<locked>>
86%
36535
88%
**61
95%
ReloadSwiss RS 14
<<locked>>
97%
28543
69%
**00
100%
Vihtavuori N120 👍
<<locked>>
87%
36100
87%
**42
99%
[Vihtavuori N130]*
<<locked>>
92%
36637
89%
**06
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
31734
77%
**60
97%
[Accurate 2015]*
<<locked>>
89%
31125
75%
**84
90%
[Alliant AR-Comp]*
<<locked>>
90%
28500
69%
**28
90%
[Alliant Reloder-10x]*
<<locked>>
83%
28819
70%
**45
90%
[Alliant Reloder-7]*
<<locked>>
81%
33866
82%
**43
94%
Hodgdon TrailBoss
<<locked>>
81%
22553
55%
**54
100%
[IMR 4198]*
<<locked>>
81%
29370
71%
**05
91%
[Norma 200]*
<<locked>>
81%
30560
74%
**91
92%
ReloadSwiss RS 14
<<locked>>
81%
22263
54%
**00
100%
Vihtavuori N120
<<locked>>
81%
29936
72%
**51
97%
[Vihtavuori N130]*
<<locked>>
85%
29414
71%
**82
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page